Платата распределения питания с BEC на 12В и 5В и удобным подключением ESC
При покупке данного товара Вы получите
скидку 11 руб. в следующем заказе
(скидка добавляется в корзине, так же их можно накапливать)
Mini Power Hub Power Distribution Board PDB with BEC 5V & 12V for FPV QAV250 ZMR250 Multicopter Quadcopter
The HUB distributes power from a battery pack to 4 ESCs, as well as providing two synchronised & regulated DC outputs for powering cameras,servos, video transmitters, LEDs, etc. Batteries may range from 3S to 6S LiPo, and the BEC input is TVS protected. The HUB also features convenient solder bridge of various voltage for camera & video transmitter.
Описание:
- 2oz copper & 4-layers PCB.
- ESC & Battery solder tabs in pairs
- Solder Bridges of various voltage for Camera & VTX.
- DC/DC synchronous buck regulator, Efficiency is up to 95%.
- TVS(Transient Voltage Suppressor) protection for DC/DC chip.
- 5V & 12V Output LED indicators & Short circuit tolerant
Характеристики:
General:
- Input voltage range (2S-6S operation): 7.2 - 26VDC
- Regulated 5V and 12V outputs
- LED power indicators ( 5V & 12V outputs )
- 4 ESC outputs
ESC outputs:
- Continuous current: 20A per output
- Peak current (10 seconds/minute): 30A per output
BEC 5V output:
- Designed for RC Receivers, Flight controllers, OSD, and Servos.
- Voltage: 5.0 +/- 0.1VDC
- Continuous current: 3 Amps
- Short-circuit tolerant (10 seconds/minute)
- LED (indicates voltage is in regulation, within 10%)
BEC 12V output:
- The battery should be 4S~6S LiPo
- Standard output designed to power cameras and video transmitters,etc.
- Voltage: 12.0 +/- 0.2VDC
- Continuous current: 2 Amps (Max.3A 10s/minute)
- Short-circuit tolerant (10 seconds/minute)
- LED (indicates voltage is in regulation, within 10%)
CAM & VTX voltage bridge
- 3S operation. choose VCC for 12V camera & 12V VTX, VCC=Battery Voltage.
- 4~6S operation, choose 12 for 12V camera & 12V VTX
- 3~6S operation, choose 5 for 5V camera
- Video pass through from the CAM pad to the VTX pad
Размеры:
- Dimensions: 36 x 36mm
- Weight: 6g
- Mounting holes 30.5mm square spacing
Отзывов нет.
Только зарегистрированные пользователи могут оставлять отзывы.
Новости
Информация
Контакты
